Wooden handle light tubes sticker labeling machine, broom labeling machines

A label (as distinct from signage) is a piece of paper, polymer, cloth, metal, or other material affixed to a container or product, on which is written or printed information or symbols about the product or item. Information printed directly on a container or article can also be considered labeling.
Labels have many uses, including providing information on a product's origin, manufacturer (e.g., brand name), use, shelf-life and disposal, some or all of which may be governed by legislation such as that for food in the UK or USA. Methods of production and attachment to packaging are many and various and may also be subject to internationally recognised standards. In many countries, hazardous products such as poisons or flammable liquids must have a warning label.

Labels may be supplied separately or on a roll or sheet. Many labels are pre-printed by the manufacturer. Others have printing applied manually or automatically at the time of application. Specialized high speed label printer applicators may be used to apply labels to packages; these and other methods may be subject to recognized standards.Some labels have protective overcoats, laminates, or tape to cover them after the final print is applied. This is sometimes before application and sometimes after. Labels are often difficult to peel and apply. A label dispenser can speed up this task.

Labels can be attached by:
Heat activated adhesives: for example, "in-mold labeling" can be part of blow molding containers and employs heat activated adhesives. Hot melt adhesives are also used.
Pressure-sensitive adhesives (also called PSA or self-stick) are applied with light pressure without activation or heat. PSA labels often have release liners which protect the adhesive and assist label handling.
Rivets used to attach information plates to industrial equipment.
Shrink wrap for printed shrinkable labels placed over packages and then heated to shrink them.
Sewing for fabrics such as clothing, tents, mattresses and industrial sacks.
Wet glue such as starch, dextrin, PVA or water moistenable gummed adhesive.
Yarn, twine or plastic tie, usually referred to as a swing tag.
Static cling, where "stickers" have a static charge enabling them to attach without adhesive to smooth surfaces such as glass.

Above all different kinds of labels require different model of labelling machine. The labeling machine is specially designed for the pressure-snstive adhesive labels which stickers to the wodoen handles by dispensing the labels on the objects firstly;

Customer's samples like mob/broom wooden handle&albels:

Customer's current line for the labelling process is the mob handle putting by worker's hand and labelling processing done by machine while worker's hand must position the labelling product during labelling the broom.

According we design the customized round mob handle labeling machine in drawing and manufacture it within 20days:

NOTICE before using the labeling machine:

  • 1: Before the machine is plugged in, make sure the power switch is in the 【close】 state, and then follow the instructions.
  • 2: The machine should be wiped with dry rags if the machine does not run for a long time, ban using corrosive substances.
  • 3: It is strictly prohibited to splash liquid into the electricity box of the machine, so as to avoid corrosion of internal electrical components and resulting in short circuit.
  • 4: The appearance of the equipment should have no deformation, damage or rusting,the rotating shafts should be flexible.
  • 5: This machine is using single phase AC 220V, the power plug is flat 3 inserts and socket should have ground wire.

Basic parameter of broom labeling machines:

Components for labeling machine

2Touching screenWeinview1
3 Slide wayHIWIN
4Air cylinderXINGCHEN
5Slide wayHIWIN
6Three-phase Motor
6Stepper MotorYANKONG1
9304 Stainless Steel

Parameter setting:

  • (1)Label dispensing speed:Label dispensing motor,label dispensing speed,label wrapping speed, all is matched with each other.
  • (2)Conveyor speed:Speed of transmission chain motor rotation
  • (3)Label dispense delay:After positioning the mob, there has a delay for label machine in order to make sure that the mob is rotating stable and then the label dispensing.
  • (4)Label wrapping time: When the label dispense is finished,there is a possibility that a sticker is not affixed,so the mob and the sticker axis are continue to rotate.
  • (5)Label wrapping speed:the speed of the label motor rotating
  • (6)Conveyor stop time:When the mob is on the chain and detected by electric eye,the
    conveyor will stop.

Labeling head&label-winding diagram:

How to set up eye sensor for labeling machine:

  • First step: if the electric eye falls on the gap, the current red value is 144.
  • Second step: When the electric eye falls on the label, the current value of 4 red.
  • Third step: adjust the “set value”,
  • About 1/2 of the sum of the value that the electric eye falls on the backing paper (between the tested object and the gap of the tested object) and the value that the electric eye falls on the mark (on the tested object)
  • “Set value” is (144 + 4) / 2 = 74, adjusting the “manual button” can adjust the “set value” to about 74
  • Forth step four: move the gap position of the mark on the detection position of the electronic eye back and forth, then the red “signal light / indicator light”

In case the electric eye of measuring label is not adjusted well or the value setting is wrong or the detected objective is different, it should readjust the electric eye correspondingly. Or the phenomenon of no labeling or continuous labeling is easy to occur.


  • (1) Power supply and power-off: Check the power supply source and the fuse beside the power outlet and the fuse is 16A / 110V. Check whether the power button is pressed (powered off).
  • (2) When the marking action is abnormal: Check whether the marking position is normal, if normal, then check whether there are foreign matters blocking the action mechanism, and checking each spring is normal or the fence position is normal. Check whether the HMI parameter settings are normal. Check the relevant electric eye is normal.
  • (3) When the conveyor belt does not run: Check whether the conveyor belt speed is adjusted too slowly, check whether the operating mechanical components are blocked, check the HMI settings and check the automatic star button is on.
  • (4) When the label on the product is not in the right labeling position on the product,because peeling plate is loose,adjust the clamping sponge axial, it should neither be too loose nor too tight or adjust the spring tension of the brake band under the peeling plate.
  • (5) If the problem cannot be solved, please contact us for consulting.We will give you the best solution.

Wooden case packing for labeling machine :