Tin cans packs Cartons sealing machine with hot melt glue device

Specification of carton ssealer

Sealing speed : 800~900 / PER HOUR
Carton dimension (W) 150mm~500mm
Carton height (H) 120mm~500mm
Carton length (L) 200mm~600mm
Tape applicable: 48~60~75W x 1000ML
Roller Lenght: 570 ~770 mm (ADJUSTABLE)
Machine Dimension: L1880 x W900 x H1510mm
Weight ≈180Kgs MAX: 50dBA
Electric consumption: MAX: 1.2KW
Power supply: 220V/50Hz/60Hz/1Ph or 380V/50Hz/60Hz/3Ph
Air Source 3kg/cm2 100nl/min


The consists two parts: Carton sealing machine and hot melt glue device;

This sealer is suitable for carton sealing and the tape,Automatic sealing adhesive tape machine with automatic folding cover, is the ideal packaging equipment characteristics of the function of convience&economy and efficience.

Parts Adopted for carton folding sealing machine semi automatic

1.Motor : Taiwan Luyang
2.Power switch: Korea KACON
3.Bearing : Japan NSK
4.Cutter :Japan SKD11
5.Conveyor Belts: import from Italy
6.Caster :YX-200
7.Touched Switch:Japan OMRON
8.Intermediate Relay : Janpan IDEC
9.AC Contactor :CHINT
10.Cylinda : Taiwan SHARKO
11.Magnetic Valve:Taiwan SHARKO

Before performing adjustment works, please disconnect the power supply.

Step1: Table height adjustment
Ground the equipment on the properly storage place, adjust the table top to the desire height.
(1) Loose the adjustable screw.
(2) Adjust the height of the table leg.
(3) Lock the screw.
(4) Press the stopper to fix the position.

Step2: Pneumatic adjustment
(1) Link the machine to the pneumatic supply.
(2) Pull the screw and turn it clockwise to increase the pressure or counterclockwise to decrease the
(3) The pneumatic pressure should be adjusted to about 5-6kg/cm2.
(4) Turn the screw tightly after completing the adjustment works.

How to adjust the carton sealer for different sizes of cartons:

Technical Parameters of hot melt glue device

Glue Cylinder Volume 10L
Holding Capacity 9.8L
Melt Speed*13kg/hr
Max. Pump Rate
Air pressure Range48-415kpa(10-60psi)
Input Voltage Standard
AC200-240V 1PH 50/60HZ
Machine Size 750*450*470mm
Machine Weight 65kg
Ambient Temperature Range 0-50 ℃
Temperature Range 0-260 ℃
Max. Working Hydraulic Pressure 8.7Mpa
Levels of protection IP54

Flow chart for carton sealing process from box cartons sealer equipment:

Working Flow for fully automatic carton sealing end packaging process:

Adhesive tapes equipped with the carton sealing machine for sealing the cartons :

Sealing Machine whole set and spare parts:

Cartons samples after folding sealing carton boxes sealer equipment

Plant workshop for carton sealing machines various model for assembly&commissioning

Plywooden crate&ocean Shipping for carton sealing machines

Malfunctions and solutions on carton erection sealing equipment:


Malfunction and Solution of the Sealer
NrMalfunctionPossible reasonSolution
1Adhesive tape can

not be cut off

The reamer patch is not sharp enough.

The reamer tine isjammed by the bond.

Change the reamer patch

Launder the reamer patch

2There is tail

after the adhesive tape

is cut off.

The reamer patch is not sharp enough.

There is stem on the reamer seating.

The pulling spring is too loose.

Check if the nut on the reamer

seating is too loose or not.

Lubricate the nut if necessary.

3The adhesive tape

can’t stick to the carton


Main spring is too loose

and there is glue

on the axis of the roller.

The adhesive tape is disqualification

Adjust the pull of main spring

and clear up the roller.

Change the adhesive tape

4The carton is locked

in the midway.

The nut on the pasting wheel

is too tight,

the height adjustment of the carton’s

transporting line is not suitable,

and the main spring is too tight.

Loosen the pasting wheel,

regulate the nut,

re-adjust the height

and loosen the main spring.

5The adhesive tape

is cut down

during sealing.

The reamer patch protrudes

excessively long.

Lower the place

of the reamer patch.

6The adhesive tape is

often off the track.

The pressure of the guiding roller

on the carton is not equal.

Re-adjust the space

of the guiding roller.

7The adhesive tape

is not on the central line.

The anti-retrorse wheel is broken.Change the anti-retrorse.
8There is abnormity

during the sealing.

There is dust on the axletree seating.Clean the axletree

seating and lubricate.

9There is jut

before sealing

and drape after sealing.

The speed of different straps

is different, and the carton is not

at the proper place

when pushing into the machine.

Adjust each transporting line’s

pull to be consistent

so that the carton

can be put at the correct place.

10There is drape

after sealing

the strain of adhesive tape is too large

Wooden case packing of wine carton sealer equipment: