Basic parameter of the Tabeltop cans sealing machine
Capacity:25cans per min
Applicable height: 39mm-280mm
Cans diameter φ35-φ220mm
The tabletop can sealing machine is applicable of sealign the cans like tea cans/easy open cans/metal cans/paper cans.The sealing machine is characteristic of low working noise.
Compact structure as well as taking up small space than the traditional cans sealing machine.
According to our customers' requirements we design and manufacture the cans sealing machine in order to solve the problem in difficult adjustment of sealing plum taking up too much space .
How to adjust the cans punch and roller for the sealing machine step by step
In the picture 1 The left part is the first cutter from the roller .the cutter groove in the first cutter which has the Cusp Slot is deeper than the second cutter. In the picture it can be as a reference for the distance between first cutter and the punch head.
The right part in the picture 2 is the second cutter. There is no the Cusp slot and the cutter groove is a little smooth .The function of second cutter holds blank. The picture as a reference for the distance between the second cutter and the punch head .
The small bear from cutter arm rotates together with the Camshaft .The left roller corresponds with the lower Cam; the right roller with the upper cam .The roller will start to roll-seal by means of lever principle when the lower small bearing touch the small cam. Theoretically the cans should lift to the position just to line with the punch .At the same time the position is the optimal value to adjust the height of shaft .(this is the key point and tip)
By means of Lever principle when the small bearing corresponds with the small cam and hits the highest point, the nearest distance from the roller to punch, which is the key time to adjust the distance between the roller and punch (The important step)
Cans samples for sealing machine desktop