Round Paper Cans Jars Labeling Hot Melt Adhesive Labeling Machine with Automatic Arranging Feeding System

Parameter Of Hot Melt Adhesive Labeling Machine

Paper tube feeding method: automatic/ Manual loader
Paper tube discharging method: automatic discharger
Glue cleaning method: no need to clean
Paper tube diameter: Φ25mm-Φ130mm(automatic tube in );Φ25-Φ150(manual tube in )
Label length: 75mm-420mm
Label thickness: 75-128g /75-157g per square meter
Paper tube thickness: 0.8-15mm
Labeling precision: less than 1.0mm
Production efficiency: 25-28pieces/min
Air consumption: 0.4Mpa
Rated power: 3.1KW
Voltage Three phase: 380V/220V Single phase
Dimension: 1760X760X1400MM
Weight: 400KG


It’s one of hot melt labeling machine, be used on labeling on plastic bottle, glasses bottle, paper can, metal can and othe round pack. Can paste just on head and tail and or full of the back of labels. It Can use with several produce assembly line.

The adhesiver used for the machine to label the product with the labels is the hot melt one which is total different with the common non-dry sticker kind.

The Hot melt adhesive (HMA), also known as hot glue, is a form of thermoplastic adhesive that is commonly supplied in solid cylindrical sticks of various diameters, designed to be melted in an electric hot glue gun. The gun uses a continuous-duty heating element to melt the plastic glue, which the user pushes through the gun either with a mechanical trigger mechanism on the gun, or with direct finger pressure. The glue squeezed out of the heated nozzle is initially hot enough to burn and even blister skin. The glue is tacky when hot, and solidifies in a few seconds to one minute. Hot melt adhesives can also be applied by dipping or spraying.

In industrial use, hot melt adhesives provide several advantages over solvent-based adhesives. Volatile organic compounds are reduced or eliminated, and the drying or curing step is eliminated. Hot melt adhesives have long shelf life and usually can be disposed of without special precautions. Some of the disadvantages involve thermal load of the substrate, limiting use to substrates not sensitive to higher temperatures, and loss of bond strength at higher temperatures, up to complete melting of the adhesive. This can be reduced by using a reactive adhesive that after solidifying undergoes further curing e.g., by moisture (e.g., reactive urethanes and silicones), or is cured by ultraviolet radiation. Some HMAs may not be resistant to chemical attacks and weathering. HMAs do not lose thickness during solidifying; solvent-based adhesives may lose up to 50-70% of layer thickness during drying

General adhesive properties

Open time: the working time to make a bond, where the surface still retains sufficient tack, can range from seconds for fast-setting HMAs to infinity for pressure-sensitive adhesives
Set time: time to form a bond of acceptable strength
Tack: the degree of surface stickiness of the adhesive; influences the strength of the bond between wetted surfaces.
Surface energy: which influences wetting of different kind of surfaces.

Application of labeling machine hot melt glue labeller

This fully auto hot melt adhesive stickers labeling machine is widely used in paper can,tin can,iron can,paper tube,cone stick,package tube,industrial tube,tea package tube,red wine tube,,Chemical fiber tube,Calendar tube etc. kinds of paper tubes.

Workflow of hot melt labeling machine automatic

Put paper cans inside machine, optoelectronic switch detects paper cans, clutch label-rubbing wheel starts to actuate for 15-80 , then comes off automatically to convey label papers to label-conveying roller, label papers are driven by label-conveying roller to continue moving forward, realizing automatic gluing and paper cans labeling. Note: Because of the different size of paper can, detection distance of optoelectronic switch needs to be reasonably adjusted. The distance between optoelectronic head and paper can is approximately 4cm.

Product Feature for hot melt glue labeling machine

  • It is easy to change different cans and labels which only needs adjusting the tubes hopper and tubes position and changing the parameter in the HMP touch screen. The hotmelt glue labeling machine is equipped with the PLC controlling system.
  • The optical sensor will automatically detect the paper cans when the paper cans are put down on the materials hopper. It takes one second to finish the labels feeding/ gluing/labeling and dropping of final labelled cans.
  • It actualizes the intelligent operation by adopting the PLC controlling system whose system reaction speed runs twice than the normal electric circuit system; The machine functions with pre-heating setting and overload protection against the overheating as well as parameter memory.
  • The thickness of hotmelt glue can be randomly adjusted from 0.05mm to 0.1mm.It is adapted with the foreign materials filter system to stop the paper cans scraps to fall into the glue during labeling,it therefore saves the consumption of hotmelt glue.
  • The materials of three-rollers system is made from the fine high temperature resistant silicons; Even the large-diameter round thinc cans can be labelled stablly in a good station.
  • The temperature-controlling module is embedded in the PLC system which can keep the hot melt glue at a certain temperature. The embedded module makes the temperature indifference stay at 0.1degree saving a lot power.
  •  There is no need manually taking out the final paper tubes;That is mean: When the paper can is labelled they are dropped out automatically.
  • The patent-design hotmelt coating setting is characteristic with steady gluing and fast cooling within 0.3s.It never happens on the cases like opening or crevice on the head of label.The labeling effect is clean and tidy.
  • The Bearing brand is NSK imported from Japan and the paper label feeding clutch adapts Japan brand Mikipulley which improves the label-feeding precision and duration;

Specifications of Hot melt pipes labeling machine with pipes arranging feeding automated system:

Mark: Roller is cladded by PU, compared with the common roller which is cladded by rubber, has better heat-resistance and is beneficial to keep balance.

Configuration of hot melt glue labeling machine with automated pipes arranging system:

Electrical equipmentQutyBrand/remarkElectrical equipmentQuty.Brand/remark
Speed adjustment motor1setWanshsin/OPG/JSCCPLC1setDelta
Life and fall down motor1setWanshsin/OPG/JSCCEUT electric eye1setOMRON
Label electric eye1setOMRONScreen1setDelta

Labeling samples

Wooden case packaging before ocean shipping for glue labeling machines